Axeon DT-Series Manuel d'utilisateur télécharger pdf (Page 8)

DT – Series User’s Manual

MKTF-208

NOTE: IT’S

RECOMMEND

SYSTEM IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODES

(NEC).

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, THE

INCOMING POWER SUPPLY MUST INCLUDE A PROTECTIVE EARTH GROUND.

DT-Series systems are

typically controlled with a liquid level switch in a storage tank.

The liquid level switch turns the system on when the water level in the tank drops, and

off when the tank is full.

Liquid level switches can be obtained by your local dealer or

distributor.

If a liquid level switch is to be used, install it at this time.

PRE-FILTRATION

DT-Series systems are

supplied with a 10 Micron FSI Bag Filter and a 4.5” x 20” 5

Micron polypropylene sediment filter

15 psi differential ex

ists between the pre

Pre-

Filtration systems, if required.

NOTE: THE SYSTEM MUST BE OPERATED ON FILTERED WATER ONLY.

PUMP

The pump

type used on the DT

pump. These pumps are

also available

Follow these guidelines to ensure proper operation of the pump:

 The pump must

NEVER

water

will damage the pump.

 ALWAYS

feed the pump with filtered water. The pump is susceptible to damage

from sediment and debris.

RECOMMEND

THAT A LICENSED ELECTRICIAN WIRE YOUR

SYSTEM IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODES

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, THE

INCOMING POWER SUPPLY MUST INCLUDE A PROTECTIVE EARTH GROUND.

typically controlled with a liquid level switch in a storage tank.

The liquid level switch turns the system on when the water level in the tank drops, and

Liquid level switches can be obtained by your local dealer or

If a liquid level switch is to be used, install it at this time.

supplied with a 10 Micron FSI Bag Filter and a 4.5” x 20” 5

Micron polypropylene sediment filter

. Change the cartridge once a

month or when a 10

ists between the pre

-filter. Ask your local deale

r or distributor about

Filtration systems, if required.

NOTE: THE SYSTEM MUST BE OPERATED ON FILTERED WATER ONLY.

type used on the DT

-Series systems is a multi-stage

centrifugal

also available

as an option

in stainless steel

Follow these guidelines to ensure proper operation of the pump:

NEVER

be run dry. Operating the pump without sufficient feed

will damage the pump.

feed the pump with filtered water. The pump is susceptible to damage

from sediment and debris.

06/12

THAT A LICENSED ELECTRICIAN WIRE YOUR

SYSTEM IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODES

WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK, THE

INCOMING POWER SUPPLY MUST INCLUDE A PROTECTIVE EARTH GROUND.

typically controlled with a liquid level switch in a storage tank.

The liquid level switch turns the system on when the water level in the tank drops, and

Liquid level switches can be obtained by your local dealer or

supplied with a 10 Micron FSI Bag Filter and a 4.5” x 20” 5

month or when a 10

r or distributor about

NOTE: THE SYSTEM MUST BE OPERATED ON FILTERED WATER ONLY.

centrifugal

carbon steel

in stainless steel

be run dry. Operating the pump without sufficient feed

feed the pump with filtered water. The pump is susceptible to damage

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 54 55

Commentaires sur ces manuels

Pas de commentaire

Axeon DT-Series Manuel d'utilisateur Page 8

Commentaires sur ces manuels

Produits connexes et manuels pour Purificateurs d'eau Axeon DT-Series